Introduction of Huawei HG8346M Management Interface

In order to enter the device, the PC’s ip of administrator should maintain the same network segment with it, so the ip address of computer should be set as 192.168.100.2 255.255.255.0, connecting the cable with the LAN port of ONT,
opening the web on your 3g wifi router PC and inputting 192.168.100.1, the following interface would be shown on a PC.

On the Status screen, we can see the WAN Information, VoIP Information, WLAN Information, Eth Port Information, DHCP Information, Optical Information, Device Information of the device, etc. With this information, we can know whether the
state of the equipment is operating properly, for example, if you want to know whether the Internet is normal, you can enter the WAN Information, check the connection status.

There are two modes of WAN, one is Route WAN, connecting external network via the set Gateway HG8346M devices; 3g wireless router another is Bridged WAN, by connecting the set bridge HG8346M with the same network segment between the related HG8346M and HG8346M to ensure the interconnection of the equipments. Customers can choose the connection mode according to their needs.
http://ameblo.jp/jumitop/